Products

DH-VO… * 1000 – 4000 KG

2615

The DH-VO… are specially designed to load and unload vehicles with multiple or moving loading floors. All DH-VO… are equipped with a flat platform, offering a smooth and level ride from the various loading floors to the ground (and vice versa).

The DH-VO… have a cylinder beam at or below the vehicle floor level, so that the passage height through the aperture of the vehicle body remains intact. It is however not suitable for vehicles with a very low floor level.

Lower beam lifts are available in various models and geometries, and for different capacity classes. All exterior lifts are equipped with 2 tilt cylinders, hence the platform orientation is adjustable from the exterior controls. The most common lift models are:

DH-VO25.D2.A10   ●   1000 – 2500 kg (old name = DH-VO4)

  • Basic model, robust & heavy duty, multi-functional
  • Compact cylinder beam = 360×237 mm (LxH)
  • Platform = steel frame + aluminium infill profiles
  • Lifting height to max. 2970 mm above the ground or 1150 mm under the roof level
  • Shrouds and platform seals on the outside

DH-VO25.D2.B10   ●   1000 – 2500 kg (old name = DH-VO3)

  • Advanced model, allowing additional options (such as OVP404 = double manual toe-guards on the platform and the cylinder beam without electrical detection), and offering extra lifting height
  • Larger cylinder beam = 480×237 mm (LxH)
  • Platform = steel frame + aluminium infill profiles
  • Lifting height to max. 3130 mm or 1150 mm under the roof level
  • Shrouds and platform seals on the outside of the columns

Options: all DH-VO… offer a wide choice of options to adapt the lift to the specific requirement of each and every customer: safety rails on 2, 3 of 4 sides; roll-stops or hinged ramps; side loading ramps; foldable or slide-out ramps at the rear edge of the platform, etc…

Column lifts

2615http://systemssa.gr/wp-content/uploads/bfi_thumb/dhollandia-1-nl302w4dap082l0mhqcqx9ktyymiihxoxrj9oytama.jpg2615